Section 4: Operation And Adjustment; Wheel Locks - Leggero DYNO User Manual

DYNO

Section 4: Operation and Adjustment

Tools Required:
4mm Hex Wrench
4.1 Wheel Lock Operation
1. To engage wheel locks, pull up on center
of crossbar with foot. Reference Figure 2.
2. Verify wheel locks are engaged on each
side by trying to move chair front to back.
3. To disengage wheel locks, push down on
center of crossbar with foot. Reference
Figure 3.
5mm Hex Wrench
Page 12
User Manual
10mm Wrench
To Engage
Pull Up
Figure 2
To Disengage
Push Down
Figure 3