Section 3: Unpacking Your Dyno Chair - Leggero DYNO User Manual

DYNO
Section 3: Unpacking the Dyno Chair
1. Remove chair from packaging.
2. Discard all plastic packaging materials.
3. Install rear wheels, reference Figure 1.
4. Check for proper adjustment of quick release
axles by pulling outward on wheel. Wheel
should hold in place.
5. Engage wheel locks, reference section 4.1 of
this manual.
6. Unfold frame and seat back, reference Section
4.7 of this manual.
7. Check tire pressure. Front and rear tire
pressure should be 35 PSI/240 kPA.
WARNING! Please keep packaging material
away from children. Discard all plastic packaging
material immediately after unpacking.
Page 11
User Manual
Figure 1