Page 1
DYNO USER MANUAL CHAIR PROVIDER: THIS MANUAL MUST BE GIVEN TO THE USER OF THIS DEPENDENT MOBILITY BASE USER: READ THIS MANUAL BEFORE USING THIS DEPENDENT MOBILITY BASE AND SAVE FOR FUTURE REFERENCE Product delivered may vary from the one described and pictured in this manual.
Page 2
User Manual DYNO You have made a great choice for your child by choosing a Leggero chair. We believe that every child should be able to function to the best of their ability. We welcome questions and comments about our products and services. Please contact us or an authorized provider using the information below.
Back Height Adjustment 4.11 Seat Depth Adjustment 4.12 Tray or Grab Bar Use 4.13 Changing Activator Dynamic Springs 4.14 Using the Dyno as a Chair in a Motor Vehicle Section 5: Limited Warranty Section 6: Maintenance and Maintenance Record Page 3...
DYNO Section 1: Introduction, Warnings, & Features 1.1 Introduction Thank you for selecting the Dyno chair. This manual explains how to operate, adjust, and maintain your Dyno chair. The product as described is subject to technical alterations without notice. We are sorry that we cannot offer this user information in a format, appropriate for use by visually impaired people.
Section 2: Warnings Read this Manual Completely Before Using All caregivers and/or attendants must read this user manual prior to operating the Dyno chair. Familiarize yourself with the handling and functions of the product prior to actual use. If there is any information in this manual that you do not understand, please contact your authorized Leggero provider for assistance.
Page 9
WARNING! Procedures other than those described in this manual must be performed by a qualified technician. WARNING! The weight carried by the Dyno chair must not exceed the total weight limit of 80lb/36kg (Maximum occupant weight plus weight of accessories and/or items carried.) WARNING! Adjustments made to the chair may affect stability, increasing the risk of tipping.
Page 10
Problems detected must be repaired prior to resuming use of the chair. WARNING! Many of the fasteners used to construct the Dyno chair consist of a bolt with a nut that contains a nylon lock ring. These connections must be maintained and secured with the original equipment fasteners and properly adjusted.
User Manual DYNO Section 3: Unpacking the Dyno Chair 1. Remove chair from packaging. 2. Discard all plastic packaging materials. 3. Install rear wheels, reference Figure 1. 4. Check for proper adjustment of quick release axles by pulling outward on wheel. Wheel should hold in place.
User Manual DYNO Section 4: Operation and Adjustment Tools Required: 4mm Hex Wrench 5mm Hex Wrench 10mm Wrench 4.1 Wheel Lock Operation 1. To engage wheel locks, pull up on center of crossbar with foot. Reference Figure 2. 2. Verify wheel locks are engaged on each side by trying to move chair front to back.
User Manual DYNO 4.2 Handlebar Angle Adjustment 1. Press and hold buttons with thumbs on inside of each adjustment ratchet, reference Figure 4. 2. Adjust handlebar to desired angle. 3. Release buttons. Figure 4 4.3 Caster Swivel Lock Engagement 1. To engage caster swivel lock, rotate wheel forward as Swivel shown in figure 6.
User Manual DYNO 4.5 Hip Angle Adjustment & Activator Dynamic Seating Mode Chairs Equipped with Activator Dynamic Seating Option 1. Engage wheel locks. 2. Place both hands on handlebar. 3. To lock hip angle in 90° position, push handlebar as far forward as possible.
Reference Figure 11, arrows indicate potential pinch points. Figure 12 Pull Back on Push down on top of Push Forward on Dyno in Folded mechanism with foot Handlebar to Unfold Handlebar Position 4.8 Folding and Unfolding...
User Manual DYNO 4.9 Footbed Adjustment 1. Loosen button head bolts 1 on left and right clamps (2 bolts per side). 4mm hex wrench required. 2. Slide footbed up or down to desired position. 3. Tighten bolts. 4. Footbed position can also be moved front to...
User Manual DYNO 4.12 Tray or Grab Bar Use 1. To install tray or grab bar, swing left and right cam locks downward. Reference Figure 17. 2. Slide tray or grab bar into receivers to desired depth. 3. Swing left and right tray cams upward to lock in place.
The Dyno Chair can accommodate up to 80 lb. Do not exceed this occupant weight. • The Dyno Chair must be placed in a forward-facing position when used as a seat in a motor vehicle. Use an approved 4-point strap-type tie-down system for the chair. Use an approved 3-point belt to restrain occupant.
3. This warranty shall not apply to problems arising from normal wear, and such evaluation will be solely determined by Leggero LLC. 4. This warranty is void if the product is modified without Leggero’s express written consent including, but not limited to, modification through the use of unauthorized parts or attachments; products damaged by reason of repairs made to any component without specific consent of Leggero;...
DYNO Section 6: Maintenance Please consult your authorized provider if you have questions regarding maintenance of your Dyno chair. Consistent and thorough maintenance will extend the useful life of your chair. Improper maintenance can significantly decrease the useful life of the chair. Any damaged parts should be replaced prior to resuming use of the chair.
Page 21
User Manual DYNO Maintenance Record Service Date Provider Technician Description of Service Page 21...