Dvd Playback - Telefunken TDV-6000 Operating Instructions Manual

DV6T714D-RG1H(TDV6000)1 02.8.12 10:18 AM

DVD Playback

1
This DVD video
plays Region 3 or
ALL-region discs.
Inserting a DVD video
2
disc with another region
code will produce a
region code error.
3
DVD
VCR
MENU
TITLE/PBC DISPLAY
OPEN/CLOSE OUTPUT
PR
SETUP
ENTER
PR
SUBTITLE
REPEAT ZOOM AUDIO
PREV
NEXT
PLAY/PAUSE
PROGRAM SEARCH
CLK/CNT MARK
REC SPEED/ANGLE TV/VCR
TRACKING
SYSTEM
˘ ` 27 mac001 300DPI 120LPI
Press [ ] button to power up the VCR-DVD player.
• Power up the TV and select the channel for viewing the VCR-DVD player.
• Press [DVD] button of remote control to change into DVD mode.
Press [OPEN/CLOSE] button to open the disc tray.
Place a disc firmly on the disc tray, making its label look upward.
Insert the disc and press [OPEN/CLOSE] button to close the tray.
The disc tray closes and after the player reads the disc, either playback
commences automatically, the disc stops or the on-disc menu starts up.
• Most DVD films show on-screen menus where the navigation keys are used to
move some kind of highlight or indicator onto the chosen item and [ENTER] OR
[PLAY] is pressed to confirm it.
To read more about these menus, please see ' Displaying menus in a disc', on page 57.
4
To playback, press [PLAY/PAUSE] button.
• Press [PLAY/PAUSE] at any time during playback to
freeze the picture and press it again to resume
playback.
STANDBY/ON
• Most DVD films show on-screen menus where the navigation
buttons are used to move some kind of highlight or indicator
OPEN/CLOSE
onto the chosen item and ENTER is pressed to confirm it.
NAVIGATION 5
To stop, press [
and ENTER
Resume Stop.
If you press the stop button once, the picture goes off
PLAYBACK/
but you can resume play from the point you stopped
PAUSE
by pressing [PLAY/PAUSE] again.
Full Stop.
STOP
If you press the stop button twice in succession, the disc
completely stops. It re-loads from the beginning when
you press [PLAY/PAUSE] again.
6
Press [OPEN/CLOSE] button to remove the disc.
] button.
27