Prog; Slow; Setup; N/P - Telefunken TF-DVD5062 Instruction Manual

chapters or titles, set up the playing order to
your preference. Press PROG to enter the
programming menu.
• Press number buttons to input the number
of the track, title or chapter. If programmed
tracks are over ten, select
ENTER to go on programming. Maximum 20
programmable items are possible. Use cursor
buttons to move the cursor to START item.
Press ENTER to start program playback. Press
the PROG button to cancel programming.
This function is not available for MP3
dicsc.

SLOW

Press the SLOW button repeatedly to slow
playback speed as follows: X2 => X4 => X8 =>
X16 => normal.

SETUP

Press SETUP to enter or exit the system
setup menu.

N/P

Press the N/P button to select between PAL/
Multi/NTSC video modes. This function is
available when no disc is being played.

REPEAT

Press the REPEAT button to repeat a title,
chapter, track or the whole disc.
• When playing a DVD disc, press REPEAT
continually to repeat chapter =>title => all =>
repeat off.
• When playing SVCD, VCD, CD discs,
press the REPEAT button continually to repeat
track => all=> repeat off.
• When playing an MP3 disc, press REPEAT
continually to play folder => single => repeat
track => repeat folder.
A - B
• Press the A-B button at the start point (A)
and at the ending point (B) to select the repeat
fragment.
• Press A-B for the third time to cancel the
fragment repeat and return to normal playback.
in which you can select Disc or USB playback
and press
with cursor buttons.
drive are the same as for discs.
audio stream, press the LANGUAGE button to
select the needed language.
Playback Control (PBC) function (for VCD
discs supporting PBC function).
playback after activating the disc title menu
with the TITLE button.
ZOOM button to zoom in the picture as follows:
2x => 3x => 4x => normal. In zoom in mode,
press cursor buttons to move the picture for
viewing.
with multi-channel audio, press the L/R button
to select left channel/right channel/stereo/mix
audio output.
on the current playback: title/chapter, time
elapsed, etc.
mode.

DVD/USB

Press this button to access the media menu
Operations with files stored on a USB

LANGUAGE

When playing a DVD with more than one

PBC

Press this button to turn on or off the

RESUME

Press this button to go back to the current

ZOOM

When playing DVD, SVCD, VCD disc, press

L/R (

)
When playing Super-VCD, VCD, CD discs

REMAIN

Press this button to display various info

VIDEO

Press VIDEO to select the video output
Operation
9
9