Advertisement
Getting Started
3
3 Snap the mop head into the base to
secure it. Press the release button to
exchange mop heads.
4 Turn the water tank cap counter
clockwise and remove from the tank.
Use the filling flask and pour water
into the tank. Please do not overfill.
Replace the cap on the water tank by
turning clockwise and tightening.
4
TOLL FREE: 1-800-798-7398
Calcium and mineral deposits
can build up and impact the
performance of your steam mop
over time. To extend the life of
your product we recommend that
you use distilled water or Shark
's
®
Water Filtration Bottle.
Visit www.sharkclean.com to order.
4
IMPORTANT: Do not use on unsealed
wood or unglazed ceramic floors.
On surfaces that have been treated
with wax or some no wax floors,
the sheen may be removed by
the heat and steam action. It is
always recommended to test an
isolated area of the surface to be
cleaned before proceeding. We
recommend that you check the use
and care instructions from the floor
manufacturer.
5
5 For your comfort, you can adjust the
height of the mop. Just lift the latch
on the tube 90 degrees to the open
position. Holding the handle, extend
the tube to the height that's right for
you and then close latch to locked
position.
QUICK TIP: For easier pushing and
pulling, extend the handle length.
www.sharkclean.com
5
Advertisement
