Using The Alarm - Accurist 6W50 Operating Instructions Manual

Note: If the hour hand passes 12:00 AM (midnight) during correction, the date is
advanced by 1 day following completion of hand movement. If the time difference is
corrected in the counter-clockwise direction and the hour hand passes back over 12:00
AM, although the date is corrected following completion of hand movement, since the
date is corrected by 30 days in the clockwise direction, it takes about 2-3 minutes for
the date to be corrected. Pay attention to AM and PM when correcting time difference.

Using the alarm:

The alarm function uses a 24-hour clock. Once the alarm has been set, the alarm
sounds for 15 seconds when the set time is reached once a day. The time at which the
alarm sounds applies to the time (TME) mode, and cannot be set based on the local
time (L-T).
continued...