Extreme Networks E4G-200 Installation Manual page 62

•
MRJ21-to-MRJ21 cable
Caution
When you handle the RJ21 cable for the E4G-B16T1E1 module, be careful not to bend the cable
too sharply, especially at the connector. Make sure the cable extends at least 3 inches (8 cm)
from the back panel of the module before it starts to bend.
Figure 46: MRJ21-to-RJ-48 Fan-out Cable
To connect the cable, follow these steps:
1 Align the cable connector with the port connector and firmly press the cable connector into place.
E4G Routers Hardware Installation Guide
Installing an E4G Series Router
62