•
DB-9-to-RJ-45 adapter
•
Two pluggable DC terminal block connectors (Dinkle part number 2ESDVM-03P)
Recommended insulation colors are:
•
Green, or green with yellow stripe, for the ground connection
•
Red and black for the power and return connections
Have the additional items on hand before you begin the installation:
•
Connection hardware appropriate to the installation site:
•
Hardware for connecting the ground wire to the site grounding point
•
Hardware for connecting the power wires to the DC source
•
Stripping tool
•
Torque screwdriver and wrench or torque driver with attachments for tightening screws
•
The ground lug requires a 1/4-inch screwdriver tip.
•
The screws on the DC power connector require a 1/8-inch straight screwdriver tip.
Installing the E4G-200 Router in a Rack
The E4G-200 router is installed in a standard equipment rack.
Two rack-mounting brackets, and eight screws, are provided in the product packaging.
To rack-mount the E4G-200 router, follow these steps:
1
Decide which position (front-mount or mid-mount) is most suitable for the installation.
Position the mounting brackets as shown in
Figure 16: Positions for the Mounting Brackets
2 On each side of the router, use the screws provided to attach a mounting bracket in the selected
mounting position.
E4G Routers Hardware Installation Guide
Installing an E4G Series Router
the following
figure.
39