Table of Contents
Advertisement
using your microwave oven
Multistage cooking (programmed sequence)
The oven may be set to carry out a sequence of up to two cooking stages. Either of the
defrost functions can be used as part of the sequence before the cooking stage. The
possible sequences are:
•
Defrost > microwave cooking
•
Microwave cooking first stage > microwave cooking second stage
The following example describes setting a defrost period followed by a microwave cooking
sequence.
1.
Place the food in a suitable container on the turntable and close the door.
2.
Press the Defrost by Weight or Speed Defrost button. dEF1 or dEF2 will be
displayed.
3.
Use the number buttons to enter the weight of the food.
4.
Press the Power Level button.
5.
The display will show P100 to indicate full power. If required, press the Power Level
button until the required power level is displayed.
Use the number buttons to enter the cooking time.
6.
7.
Press the Start/Express Cook button.
8.
The cooking sequence will begin.
9.
When the sequence has ended the oven will beep.
This example describes how to set a two stage microwave cooking sequence. The first
stage will cook on full power for 2 minutes and the scond stage will cook on 50% power
for 1 minute.
Press the Power Level button. The display will show P100 to indicate full power.
1.
2.
Use the number buttons to enter the first stage cooking time (2:00).
3.
Press the Power Level button three times. The display will show P50 to indicate
50% power.
Use the number buttons to enter the second stage cooking time (1:00).
4.
Press the Start/Express Cook button.
5.
6.
The cooking sequence will begin.
7.
When the sequence has ended the oven will beep.
1
Advertisement
Table of Contents
