Setting The Equalizer (Eq3) - Sony cdx-v5800 Operating Instructions Manual

Selecting the desired item
Press the select button and the
desired button simultaneously.
Select button + (3): A.SCRL*
Select button + (4): M.DSPL
Select button + (4): DEMO*
Select button + (6): BEEP*
Select button + (MODE): PAL/NTSC*
Select button + (DSPL): DIM
After the mode setting is complete, the display
returns to normal play mode.
To cancel the item, press the select button and the
desired button simultaneously again.
*1 When the unit is turned off.
*2 When CD is played.
*3 The beep sound is output only when the built-in
amplifier is used.
18

Setting the equalizer (EQ3)

You can select an equalizer curve for 7 music
2
types (XPLOD, VOCAL, CLUB, JAZZ, NEW
AGE, ROCK, CUSTOM and OFF (equalizer
OFF)).
1
You can store a different equalizer setting for
3
each source.
1
Selecting the equalizer curve
1
2
Adjusting the equalizer curve
You can store and adjust the equalizer settings
for different tone ranges.
1
2
3
Note
When EQ3 is set to "OFF," you cannot adjust the
equalizer curve settings.
Press (SOURCE) to select a desired
source.
Press (EQ3) repeatedly to select the
desired equalizer curve.
Each time you press (EQ3), the item
changes.
To cancel the equalizing effect, select "OFF."
Press (SOURCE) to select a desired
source.
Press (EQ3) repeatedly to select the
desired equalizer curve.
Adjusting the equalizer curve.
1 Press the select button repeatedly
to select the desired tone range.
Each time you press the select button, the
tone range changes.
LOW t MID t HI (t BAL t FAD t
LPF t SUB t AUX )
2 Rotate the volume control dial to
adjust to the desired volume level.
The volume level is adjustable by 1 dB
steps from –10 dB to +10 dB.
3 Repeat step 1 and 2 to adjust the
equalizer curve.
To restore the factory-set equalizer curve,
press the select button for 2 seconds.