Advertisement
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-5. F/R Change lever
ASSEMBLING
Mount F/R Change lever to Handle cover, and assemble them to Motor housing as illustrated in Fig. 16.
Fig. 16
Facing the mark of >PC< to the top, assemble F/R Change lever.
Otherwise, Reverse switch can not be controlled by F/R Change lever.
Mark of
> PC <"
Fig. S
Fitting the grooved portion to
the pin of Switch, assemble
Handle cover to Motor housing.
After assembling F/R Change lever
to Handle cover, mount the Handle
cover to Motor housing.
Refer to Fig. S.
Switch in
Motor housing
F/R Change
lever
F/R Change lever
Pin
P 8/ 10
Advertisement
