Advertisement
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-4. Baffle plate
DISASSEMBLING
(1) Separate Hammer case section and armature from Motor housing, as illustrated in Fig. 2.
(2) Baffle plate can be removed as illustrated in Fig. 13.
Fig. 13
Slide Baffle plate to Handle cover, and pull it up.
ASSEMBLING
Take the disassembling step in reverse.
[3]-5. F/R Change lever
DISASSEMBLING
Remove Handle cover. So, F/R Change lever is disassembled together with Handle cover. Remove F/R Change lever
from Handle cover. See Fig. 14, 15.
Fig. 14
Separate Handle cover from Motor housing by
removing 4x18 Tapping screws. F/R Change lever
comes with Handle cover.
Fig. 15
F/R Change
Handle cover
lever
Push F/R change lever to left or right side
until it stops. Both ends are free from
Handle cover.
Baffle plate
Handle
cover
F/R Change
lever
Handle cover
Pull the F/R Change lever to the inside
of Handle cover. And remove it.
P 7/ 10
4x18 Tapping
screw (3pcs.)
Advertisement
