Advertisement
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-1. Hammer case complete (cont.)
DISASSEMBLING
(2) Disassemble Hammer case section as illustrated in Figs 3 and 4.
Figs 3
Pull off Armature while holding Internal gear cover complete and Hammer case complete by hand
so that they do not separate out.
Hammer case complete
Internal gear cover complete
Figs 4
Remove Hammer case complete from Internal gear cover complete, and then disassemble the
components as illustrated below.
Hammer case
complete
Internal gear
cover complete
Flat washer 19
(This washer is left in Hammer case complete
due to grease.)
Anvil
Remove Flat washer 8, and then
pull off Pin 6.
Spur gear 32 can be removed
from Hammer section.
Hammer section
Internal gear 71
O ring 58
P 3/ 10
Flat washer 18
Pin 6 (2pcs.)
Spur gear 32
(2pcs.)
Advertisement
