Dv-S9 - Pioneer DV-09 Service Manual

QQ
3 7 63 1515 0
Loading Mechanism Assy
Remove the tray panel after the tray opened.
Hold the DVD MAIN Assy on the MAIN SHIELD(lower).
Turn the short SW to ON position(outside)
Remove the DVD MAIN Assy .
Remove the MAIN SHIELD(lower).
Remove the Mechanism Assy after the tray closed.
TE
L 13942296513
Assemble DOOR SUPPORT ASSY
1. Set the Gear Box to the Front Panel
with condition like a indicated figure.
2. Set the door support block to the Front
Panel with the Door Support opened
most outside.
NOTE:
÷ If it is hard to assemble, remove the Door Spring B.
÷ It is necessary to set precisely, if the gear is not
engaged, the tray will touch the door .
www
.
http://www.xiaoyu163.com
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8
OUTSIDE
(Short position)
Short SW
Q Q
3 6 7 1 3 1 5
lacked gear
Fitting Mark
( )
Turn clockwise
co
SWITCH ARM
.
DV-09, DV-S9
9 4 2 8
Turn the short SW to
ON position(outside)
after the PICK UP
Assy moved most
outside.
0 5 8 2 9 9 4 2 8
LOADING MECHANISM Assy
unengaged gear
DRIVE GEAR A
DRIVE GEAR B
Fitting Mark
( )
DRIVE GEAR D
m DRIVE GEAR C
9 9
9 9
77