Sharp LC-80LE642U Service Manual page 53

Is INPUT-3 selected on the input select menu screen?
Does the HOT PLUG detection function?
Does the DDC5V signal come from pin (18) of SC1503 to pin (56) of IC2601
(HDMI_SW)?
Does the HPD signal come from pin (55) of IC2601 to pin (19) of SC1503?
Is IC2601(HDMI-SW) accessed by I2C, with HDMI connected, to read the DDC-I2C
SCL/SDA data?
Are there the TMDS signal at input pins of IC3301(CPU)?
Is the T-CON PWB connected?
VBO_LOCKN pin(40) of SC3801 become Low if there is no problem in the connec-
tion.
Are the V-By-One HS signal input to the pin of SC3801?
VBO_CN_TXA+/- (36/37pin), VBO_CN_TXB+/- (32/33pin),
VBO_CN_TXC+/- (28/29pin), VBO_CN_TXD+/- (24/25pin).
Check the panel module and harness.
<HDMI input> No video (1)-3
HDMI: No external input video [INPUT-3]
YES
YES
YES
YES
YES
YES
YES
6 – 9
NO Select INPUT-3 on the input select menu screen for
the right input signal.
Check the line between the pin(18) of SC1503 and
NO
the pin(56) of IC2601.
NO Check the line between the pin (55) of IC2601 and
the pin (19) of SC1503.
Check the DDC-I2C line and its peripheral circuits.
NO
SC1501 pin(15)(SCL), pin(16)(SDA)
IC2601 pin(54), pin(53)
Check the TMDS line (between SC1503 and
IC2601) and its peripheral circuits.
NO
[IC2601 TMDS input pins]
pin(8/9)(CLK-/+), pin(10/11)(D0-/+), pin(12/13)(D1-/
+), pin(14/15)(D2-/+).
Check the TMDS line (between IC2601 and IC3301)
and its peripheral circuits.
[IC3301 TMDS input pins]
pin(AH35/AH34)(CLK-/+), pin(AG35/AG34)(D0-/+),
pin(AG37/AG36)(D1-/+), pin(AF35/AF34)(D2-/+).
Check the I2C line (between IC2601 and IC3301).
IC2601:pin(71)(SCL), pin(70)(SDA)
IC3301:pin(AN12), pin(AP12)
Check IC2601 and its peripheral circuits.
NO Check the T-CON PWB and harness.
Check IC3301 and SC3801 and their peripheral cir-
cuits in Main PWB.
NO Check IC3301 and its peripheral circuits.
(IC3501/IC3502/IC3503/IC3504, etc.)
LC-80LE642U