Wired Ethernet Network Cable Setup; Wireless Setup - NETGEAR Digital Entertainer EVA700 User Manual

Digital Entertainer Model EVA700 User Manual

Wired Ethernet Network Cable Setup

1. Select connecting it to the router with a Ethernet network cable, and then next.
2. Go to your digital entertainer, and make the audio and/or video connections
according to the instructions in "Connecting the Digital Entertainer" on
page 1-7. Then, power on the digital entertainer.
3. Go back to your PC. Select next.
Figure 2-5
4. Skip to "Completing the Setup" on page 2-6.

Wireless Setup

1. Select wirelessly, then next. Your PC will check for network equipment.
2-4
Note: If the Intel® Viiv™ software does not find an Intel® Viiv™
technology verified wireless router skip to Section 4.
v1.0, May 2006
Intel® Viiv™ Technology