Watching The Tv - Sony KF-50XBR800 Service Manual

Watching the TV

Buttons for LCD
Projection TV
Operations
RM-Y912
Many TV features can be accessed directly through the remote control. The
following will explain the function of some of the buttons found on your
remote control.
1 FUNCTION
Press until the TV indicator lights up.
This activates the remote control for use with the LCD projection TV.
2 ANT— (AUX input)
Press to change between the VHF/UHF input and the AUX input.
3 POWER
Turns the LCD projection TV on and off. If a video input indication (e.g.,
VIDEO 1, VIDEO 2) appears on the screen, press
a channel number appears.
4 0-9 and ENTER
Use for direct channel selection. Press
to select channel 10, press
or you can press
ENTER
5 CH +/–
Press to scan through the channels (+ up or – down).
6 VOL +/–
Press to adjust the volume (+ up or – down).
7 JUMP
Press to alternate or jump back and forth between two channels. The LCD
projection TV will jump between the current channel and the last channel
selected.
8 MUTING
Press to mute the sound. "MUTING" will appear on the screen and will dim
three seconds later. To restore the sound, press again or press
9 FREEZE
This is useful when you need to copy down information that appears on the
LCD projection TV's screen (see "Using the Freeze Function" on page 54).
0 DISPLAY
Press to display the channel number, current time and channel label (if set).
To turn the display off, press
to select a channel (for example,
0-9
and ). The channel will change after 2 seconds,
1 0
for immediate selection.
again.
DISPLAY
Using the Features
or until
TV/VIDEO CH +/ –
.
VOL +
(Continued)
47