Sony KF-50XBR800 Service Manual page 193

5
Loosen the two screws that secure the lamp, then pull out the lamp.
The lamp is very hot immediately after use. Never touch the front glass
of the lamp or the surrounding parts.
Loosen the two screws with the
hex key supplied with the lamp.
✍
After it has cooled, place the removed lamp into the empty box of the
replacement lamp. Never put the removed lamp into a plastic bag.
6
Mount the new lamp.
Be sure to attach the new lamp securely.
Mount the new lamp securely
into the lamp receptacle.
7
Mount the lamp cover and tighten the screw.
Make sure that the lamp cover is mounted securely, otherwise the power
will not turn on.
✍
If the lamp cover is not mounted securely, the self-diagnostic
function works and the STAND BY indicator flashes for three times
(See page 90).
Introducing the Sony LCD Projection TV
Hold the handle and pull
straight out.
Tighten the two screws securely in the
order of 1 to 2, as shown in the
illustration using the supplied hex key.
Match the projection of the right
side of the lamp cover with the
hole of the unit, and replace the
lamp cover as it was.
(Continued)
15