Hitachi DH 24PB2 Technical Data And Service Manual page 11

F. Drilling hole and driving screw (rotation only)
Drill chuck, chuck adapter (G), special screw and chuck wrench
Special screw
a.
Chuck adapter (G) for SDS-plus shank system
b.
13 mm (1/2") Drill chuck 13VLR (with chuck wrench)
c.
Special screw (M6 left-hand threaded)
(1) Cross-recessed head (Phillips) bit
[Overall length: 70 mm]
(For use with cross-recessed head (Phillips) screw)
Stamped bit No.
Code No.
Bit No. Applicable screw dia. (mm)
No. 2 955654
No. 3 955655
+
13 mm (1/2") Drill chuck
(13VLRB-D)
(Note)
If the tool is to be used for loosenng screws, open the three jaws of
the drill chuck and securely fix the drill chuck to the chuck adapter
(G) with the special screw (a left-hand threaded M6 screw) when
Chuck wrench
mounting the drill chuck onto the chuck adapter (G).
Part name
4 --- 5
6 --- 8
+
Chuck adapter (G)
(SDS-plus shank)
Code No.
303623
321814
981122
(2) Slotted-head (minus) bit
[Overall length: 50 mm]
(For use with slotted-head (minus) screw)
Tip thickness
Bit tip thickness Code No.
0.8 955658
1 955673
--- 8 ---
Applicable screw dia. (mm)
4
5 --- 6