Specifications - Makita JV100D Instruction Manual

ENGLISH (Original instructions)
1-1. Battery
1-2. Buttons
2-1. Cutting action changing lever
3-1. Lock-off button
3-2. Switch trigger
4-1. Blade holder
4-2. Bolt
4-3. Hex wrench
5-1. Bolt
5-2. Blade
5-3. Roller
6-1. Hook
6-2. Hex wrench
7-1. Dust cover

SPECIFICATIONS

Length of stroke
Strokes per minute (min
Max. cutting capacities
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for the sawing of wood, plastic and
metal materials. As a result of the extensive accessory
and saw blade program, the tool can be used for many
purposes and is very well suited for curved or circular cuts.
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
Wear ear protection
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Work mode : cutting boards
Vibration emission (a
Explanation of general view
8-1. Cutting line
8-2. Base
10-1. Hex wrench
10-2. Bolt
10-3. Base
11-1. Edge
11-2. Graduation
12-1. Bolt
12-2. Hex wrench
12-3. Base
13-1. Starting hole
16-1. Dust cover
16-2. Hose
17-1. Rip fence (Guide rule)
Model
-1
)
Blade type
Wood
Mild steel
Aluminum
Overall length
Net weight
Rated voltage
) : 76 dB(A)
pA
2
) : 10.5 m/s
h,B
ENE019-1
Uncertainty (K) : 2.5 m/s
Work mode : cutting sheet metal
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
ENG905-1
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
ENG900-1
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
4
18-1. Bolt
18-2. Fence guide
18-3. Hex wrench
18-4. Rip fence (Guide rule)
19-1. Fence guide
19-2. Rip fence
19-3. Threaded knob
19-4. Pin
20-1. Rip fence
21-1. Aluminum base
21-2. Anti-splintering device
22-1. Cover plate
22-2. Aluminum base
JV100D
18 mm
0 - 2400
B type
65 mm
2 mm
4 mm
231 mm
1.7 kg
D.C. 10.8 V
2
2
) : 7.5 m/s
h,M
2
ENG901-1