Rear Panel (2 Of 2) - Denon AVR-X7200W Product Manual


FM/AM antenna terminals (ANTENNA)
Used to connect FM antennas and AM loop antennas.

TRIGGER OUT jacks
Used to connect devices equipped with the trigger function. 1@
REMOTE CONTROL jacks
Used to connect infrared receivers/transmitters in order to
operate this unit and external devices from a different room.

RS-232C connector
Used to connect home automation controller devices fitted with
RS-232C connectors. Consult the owner's manual of the home
automation controller for more information about serial control of
this unit.
• Perform the operation below beforehand.
• Turn on the power of this unit.
• Turn off the power of this unit from the external controller.
• Check that the unit is in the standby mode.
REAR PANEL 1

Rear Panel (2 of 2)


Digital audio connectors (DIGITAL AUDIO)
Used to connect devices equipped with digital audio connectors.

Speaker terminals (SPEAKERS)
Used to connect speakers.

PRE OUT connectors
Used to connect a subwoofer with built-in amplifier or an external power
amplifier.

Video connectors (VIDEO)
Used to connect devices equipped with video connectors.

Component video connectors (COMPONENT VIDEO)
Used to connect devices equipped with component video connectors.
HOME
REMOTE CONTROL 1
7