Denon AVR-X7200W Update Manual

Dts:x update

Please note that we are very happy to announce that the free of charge DTS:X update for the AVR-X7200W and AVR-X7200WA is available for download.

This update introduces some changes to your system that we want you to be aware before you update the unit since it may affect daily usage.

The following features are added:

• DTS:X decoding

• DTS Neural:X upmixing to enjoy non DTS:X content (in PCM or DTS format) using the full DTS:X speaker configuration

With added DTS:X decoding and DTS Neual:X upmixing capability, following changes will happen to your receivers:

• DTS Neo:X will be replaced by DTS Neural:X

• Dolby Surround mode usage will be limited to PCM and Dolby content

You can also take a look in the modified user manuals for the products:

 Web manual for AVR-X7200W with DTS:X

 Web manual for AVR-X7200WA with DTS:X

AVR-X7200W(A) DTS:X UPDATE

Table of Contents

Need help?

Do you have a question about the AVR-X7200W and is the answer not in the manual?

Page 1 AVR-X7200W(A) DTS:X UPDATE Please note that we are very happy to announce that the free of charge DTS:X update for the AVR-X7200W and AVR-X7200WA is available for download. This update introduces some changes to your system that we want you to be aware before you update the unit since it may affect daily usage.
Page 2 AVR-X7200W(A) DTS:X UPDATE To update your unit, follow the below steps: Press the SETUP button on the Remote Control 2. Select General > Firmware > Update 3. Select Update Now *Note on Auro-3D upgraded units: If you have an Auro-3D upgraded unit, DTS:X firmware update won’t effect this. However we will add more flexibility to the speaker setup and after the update...

Avr-x7200wa