Figure 5-2: Connecting The Access Point; Figure 5-3: Select An Access Point - Linksys wap54g Quick Installation Manual

Wireless-G Access Point
3. The next screen displayed displays how the Access Point should be connected while running this Setup
Wizard. Optimally, you should perform this setup through a PC on your wired network. Click the Next button
to continue or Exit to exit the Setup Wizard.
4. The Setup Wizard will run a search for the Access Point within your network and then display a list along with
the status information for each access point. If this is the only access point on your network, it will be the only
one displayed. If there are more than one displayed, select the Access Point by clicking on it and click the Yes
button to continue or No to exit the Setup Wizard.
Chapter 5: Setting Up the Wireless-G Access Point

Figure 5-2: Connecting the Access Point

Figure 5-3: Select an Access Point

10