Linksys wap54g Quick Installation Manual page 5

F
The Configure Network Address
Settings screen will appear
next. Enter an IP Address, Sub-
net Mask, and the IP Address of
your network Gateway. Then,
click the Next button.
IP Address. This IP address must
be unique to your network. (The
default IP address is
192.168.1.245.)
Subnet Mask. The Access
Point's Subnet Mask must be
the same as your Ethernet net-
work.
Gateway. This IP address
should be the IP address of the
gateway device that allows for
contact between the Internet
and the local network.
G
The Wireless Settings screen
should now appear. Enter your
wireless network's SSID and
select the channel at which
the network broadcasts its wire-
less signal. Enter, also, a Device
Name to prevent any confu-
sion when using multiple
Access Points. Then, click the
Next button.
F
5