Table of Contents
Advertisement
SAFETY CHECKLIST
WARNING
1. Make sure all packing material is removed.
2. Check each connection to make sure all wires are secure after shipping.
3. Be sure batteries are fully charged before you operate the wheelchair.
4. Check that the anti-tip devices are not damaged. DO NOT OPERATE THIS WHEELCHAIR
WITHOUT THEM PROPERLY INSTALLED.
5. Install footrest/elevating legrests and armrests (including the joystick) before operating.
6. Make sure that your chair rolls easily and freely and that all parts work smoothly.
7. Check for excess noise, vibration or a change in ease of use. They may be signs of a
problem such as low tire pressure, loose fasteners or damage to the chair.
8. If you detect a problem, make sure to repair or adjust your chair before using it. Contact
your authorized Wheelchairs of Kansas dealer to help you find and correct the problem.
BATTERY INSTALLATION & REMOVAL
WARNINGS
Tools Required:
5/8" Wrench
7/16" Wrench
To install the batteries in the PEV, follow
these steps in order. To remove the
batteries, follow these steps in reverse
order. If you have any questions regarding
these instructions, please contact 800-537-
6454.
If you fail to heed these warnings, severe injury may occur to you
or others. Before each use of your wheelchair you should:
If you fail to heed these warnings, improper installation may
cause personal injury or property damage if instructions are not
followed.
PRE-USE INSPECTION AND SETUP
To Module
Power Cable
1
2
REAR OF CHAIR
5
Fuse
Holder
TOP VIEW
Advertisement
Table of Contents
