5. Remove battery box top.
6. With a 7/16" wrench disconnect the black
(negative) wire and the red (positive) wire
from each of the batteries on the left side.
WARNING
7. With a 7/16" wrench disconnect the red
(positive) wire and the black (negative)
wire from each of the batteries on the
right side.
WARNING
8. Remove Batteries.
WARNING
Place hardware in battery box and replace
battery box lid for transport. Reattach
velcro that is holding the top of the battery
box on.
Electric Shock
Hazard. Do not let
wires cross.
Electric Shock
Hazard. Do not let
wires cross.
Each battery weighs
approximately 60 lbs.
PRE-USE INSPECTION AND SETUP
7