Sanitas SBC 27 Instructions For Use Manual page 12

Icons in the display:
1. "Change battery" icon
2. Error icon EE
3. Systolic pressure
4. Cardiac arrhythmia icon
5. mmHg unit
6. Icon for users 1, 2
7. Diastolic pressure
8. Time and date
9. Number of memory space
10. Pulse icon
11. Measured pulse
12. WHO - classification
13. Memory display day/night
(A, P: AM, PM)
8
5
1
9
4
11
EE
2
6
3
13
12
7
10
4. Prepare measurement
Inserting battery
• Remove the battery
cover (left side of the
unit).
• Insert two 1.5 V
micro batteries (al-
kaline, type LR03).
Make absolutely sure that you insert the batteries with the cor-
rect polarity as marked. Do not use rechargeable batteries.
• Replace the battery cover carefully.
If the "change battery" icon
no longer possible and you must replace all the batteries.
Note: You will find these markings on batteries
containing harmful substances: Pb = battery con-
taining lead, Cd = battery containing cadmium,
Hg = battery containing mercury.
Setting date, time and language
It is vital to set the date and time. This is the only way that
measurements can be saved and recalled with the correct date
and time.
Proceed as follows to set the date and time:
• Switch on the blood pressure monitor with the
• Press the function key for over 5 seconds
• The month starts flashing. Using the "+" function key, set the
month 1 to 12 and confirm with the function key
• Set the day, hour and minute and confirm in each case with
the function key .
• Confirm your selection with the function key "+".
12
is displayed, measurement is
button.
.
.