There Is A Problem With The Broadcast; My Computer Won't Connect; I Can't Connect To The Internet - Samsung GP9ATSCH-1 E-Manual

There is a problem with the broadcast.

The Problem
The TV is not receiving
all channels.
There are no captions
with digital channels.
The picture is distorted.

My computer won't connect.

The Problem
The "Mode Not
Supported" message
appears.
The video is OK but
there is no audio.

I can't connect to the Internet.

The Problem
The wireless network
connection failed.
The software update
over the Internet has
failed.
If your TV is not connected to a cable box or satellite box:
● Confirm that the coaxial cable is securely connected to the TV.
● If you are using an antenna, verify it is positioned correctly and the all the
connections are secure.
● Run
Setup (System
Go to Caption (System
Some channels may not have caption data.
The compression of the video content may cause picture distortions. This is
especially true with fast moving pictures from sports programs and action
movies.
A weak signal can cause picture distortions. This is not a problem with the TV.
Set your PC's output resolution so it matches a resolution supported by the TV.
If you are using an HDMI connection, check the audio output setting on your PC.
If you are using a DVI to HDMI cable, a separate audio cable is required.
Confirm your wireless modem/router is on and connected to the Internet.
Reset your wireless modem/router by turning it off, waiting for 15 seconds, and
then turning it on again.
Run Network Setup (MENU
Check the network connection status
If the TV is not connected to a network, connect to a network.
The upgrade stops if you already have the latest software version.
Try this!
> Setup) or Auto Program (Broadcasting
> Accessibility > Caption) and change the
Try this!
Try this!
> Network > Network
(MENU
> Auto
Caption
Settings).
> Network > Network
Program).
Mode.
Status).