Radio Shack Chronosette-276 User Manual page 16

Clock Section
Measurement Item
Minimum Clock
operating voltage on Battery Back-up
Minimum Alarm
operating voltage on Battery Back-up
Tape Section
Measurement Item
Output Power at 1 kHz/channel
10% Distortion
Maximum
Signal to Noise
Distortion
Erase Ratio
Channel Separation
Hum and Noise Volume Minimum
Wow & Flutter
Note: Nominal specs represent the design specs.
to approximate these- some will exceed and some might drop slightly
below these specs.
condition that still might be considered acceptable: in no case
should a unit fail to meet limit specs.
*European models must not be able to tune below 87.5 MHz.
(br/all-12/27/94)
LN-03/04
Input/Test Tape
8 ohm MTT-112BN
8 ohm MTT-112BN
1000Hz MTT-112BN
1000Hz MTT-118BN
1000Hz BLANK TAPE
1000Hz MTT-141N
3000Hz MTT-111N
Limit specs represent the absolute worst
Nominal
7.0V
7.0V
Nominal
0.5W
0.65W
47 dB
3%
50 dB
36 dB
2.5mV
0.2%
All units should be able
Limit
7.5V
7.5V
Limit
0.45W
0.6W
43 dB
5%
45 dB
32 dB
5mV
0.40%