Software Installation - D-Link DCS-6815 Quick Installation Manual

Hardware Installation
STEP 7
Insert the data cable into the opening on the cap.
STEP 8
Connect the 22-pin connector to the slot on the camera enclosure.
the connector will lock into place.
STEP 9
Connect the power cable to the power adapter.
STEP 10
Connect the power adapter's 3-pin connector to the camera's
3-pin power connector.
STEP 11
Connect one end of the Cat 5 ethernet cable to the rJ-45
connector of the camera enclosure, and the other end of the cable
to your network.
STEP 12
plug the power cable into a wall outlet.

Software Installation

Insert the DCS-6815/6817/6818 CD into the CD-rOm drive. If the CD autorun function does
not automatically start on your computer, click windows Start > run. In the run command
®
box type "D:\autorun.exe", where D: represents the drive letter of your CDrOm. If it does
start, proceed to the next screen.
Click Setup Wizard
4