When An Error Occurred At The Start Of Operation - Hitachi RX2 Instruction Manual

3.1.2 When an error occurred at the start of operation

1 Press the Manual
pressing the No-cleaning stop → OK .
Solution To stop the ink jet, press <OK>.
Press OK .
3-5 ●Start operation
. The Manual Control Menu appears. Stop ink ejection by
M
Manual
2015.07.07 12:45
Com=0
M
Manual Shutdown
＝＝＝＝＝
Manual Control Menu
Start
The current message is
printing
printed.
＝＝＝＝＝ Shutdown Process Confirmation
Shutdown will stop the ink jet.
OK
Press Manual .
Press No-cleaning stop .
＝＝＝＝＝
No-cleaning
Stops ink ejection
stop
without cleaning.
No deflection voltage is
Standby
applied. The printer
status becomes Standby.
Cancel
＝＝＝＝＝
Close