Troy-Bilt 566 Operator's Manual page 9

Variable speed 21” self propelled mulching mower
Hide thumbs Also See for 566:
Table of Contents

Advertisement

Attaching Grass Catcher
Lift the rear discharge door and place the grass
catcher on the pivot rod. Let go of discharge door
so that it rests on the grass catcher. See Figure 6.
Rear Discharge
Door
Grass
Catcher
Figure 6
Converting To Mulcher
Lift the rear discharge door on the mower and lift
the grass catcher up. Release the discharge door
to allow it to close the rear opening of the mower.
Converting To Side Discharge
Make sure the grass catcher is off the unit and the
rear discharge door is closed. Refer to Figure 7.
On the side of the mower, lift the mulching plug.
See Figure 7.
Slide the two hooks of the side-discharge chute
under the hinge pin on the mulching plug assembly.
Lower the side mulching plug.
Do not remove the side mulching plug at any time,
even when you are not mulching.
Hinge Pin
(Slide hooks under the two
sides of hinge pin)
9
Mulching Plug
Deflector
Hooks
Figure 7

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

569

Table of Contents