Advertisement
LOCATION OF CONTROLS
Remote Control
1. Infra-red Transmitter
2. POWER
1
3. PRESET /
iPod/iPhone play-pause.
8
4. iPod REP button ---- iPod / iPhone repeat playback.
9
2
5. iPod RAN button ---- iPod / iPhone random playback.
6. VOLUME + / - button ---- Adjusts volume level up or down ;
4
10
Adjusts hour/minute of clock/alarm.
3
7. ALARM ON/OFF button ----Turn the alarm on and off.
5
11
8. MUTE button ---- Mute the volume.
12
9. SLEEP
button ----Select the time duration of the sleep timer.
10. FUNC button ---- Select FM RADIO, iPod/iPhone, AUX modes.
11. EQ button ---- Select preset EQ effect.
6
13
12. MODE button
14
---- In standby mode, press to adjust clock and alarm setting.
7
15
---- In FM radio mode, press to select FM stereo or mono reception.
13. CH +/- button ---- Select preset radio station.
14. TUN+ / FF and TUN- / FR buttons
- In iPod/iPhone mode, skip tracks Forward/Backward or perform
highspeed search.
- In Radio mode, tune the radio frequency up/down.
15. SNOOZE/DIMMER button ---- Activate the snooze function ;
16
16. Battery Compartment
button --- Turns the unit ON/Standby.
button ---- Save radio preset station ;
turn LCD backlight bright/dim/off.
7
RADIO OPERATIONS
FM Antenna
Unwrap and fully extend the FM Antenna wire for best FM radio reception.
Radio Tuning
1. Press the POWER
button to turn on the unit.
2. Press the FUNCTION button to select FM radio mode.
3.To manually tune to desired station, repeatedly press the
4.To automatically search for stations with strong signals, press and hold the
button until the frequency digits on display begins to scan then release the button. The tuner will stop on
the first strong station signal it finds.
Notes:
• Manual tune to select weaker stations that might be by skipped during automatic tuning.
• If the automatic tuning does not stop on the exact frequency of the station,
for example, it stops on 100.9 MHz instead of 100.8 MHz, use the manual tuning method to "fine tune"
to the exact frequency of the desired station.
• You may press the MODE button to select FM stereo or mono receiving mode, if necessary.
In stereo mode, when a FM stereo broadcast is received and will indicate "
Radio Preset Stations
The unit allows you to store up to 20 FM stations for easy recall at any time.
Preset Stations
1. Press POWER
button to turn on the unit.
2. Press the FUNCTION button to select FM radio mode.
3. Tune to the radio station you want to store in memory by using the
4. Press the PRESET button. The preset channel number "C01"appears on display and flashing.
5. To select desired preset station number, press CH + / - button.
6. To confirm preset location, press the PRESET button.
7. Repeat steps 3 to 6 to store other stations if necessary.
Note:
1. There is a 5 second delay when programming, after 5 seconds, the unit will automatically switch
back to normal tuner mode.
2. You can overwrite a present station by overwriting and storing the new frequency in its place
Recalling the preset stations
1. Press the POWER
button to turn on the unit.
2. Press the FUNCTION button to switch to the radio mode.
3. Press the CH + or CH - button to select the preset channels
8
/ TUN- or
/ TUN + button.
/ TUN- or
/ TUN +
" in the LCD.
/ TUN- or
/ TUN + button.
.
Advertisement
