Configure Server - NetComm Fast Ethernet Mini Print Server NP3640 User Manual

Printer Status
This screen displays the current status of each port. For each port, the following data is listed:
Connected Printer
Status
Printing Information

Configure Server

Print Server Name
Password
Enable Protocols
Rev. 1 - YML657
NP3640 Fast Ethernet Mini Print Server User Guide
The model name of the printer connected to the port, if the
printer name is known. (If the printer is not bi-directional, this
information is unavailable.)
The current status of the printer (On-line, Off-line, Out of
paper)
This will show either Idle or Printing.
Change the default name if you wish. The new name must not
contain any spaces or blanks.
Enter the device password, and again in the Verify field. Once a
password is entered, it is required in order to gain access and
change the configuration.
Non-TCP/IP may be disabled if they are not required on your
LAN. The available protocols depend on the Print Server model.
www.netcomm.com.au
Page 39