Section 5 - Biadmin Management Utility; Requirements; Installation - NetComm Fast Ethernet Mini Print Server NP3640 User Manual

Section 5 - BiAdmin Management Utility

This section describes the installation and operation of the BiAdmin Configuration &
Management program.

Requirements

This program requires:
Windows 95, Windows 98 or ME
Windows NT 3.51, Windows NT 4.0, Windows 2000 or XP
Additional Recommendations:
Screen resolution of 800x600 or greater.

Installation

Use the supplied CD-ROM. This CD-ROM will usually auto-run. If auto-run is disabled on
your computer, run the SETUP.exe program in the root folder.
1 Click on the Installation button and select 2. Administration. BiAdmin is always installed if
the Administrator option is chosen.
2 Start the program by using the icon created by the setup program. Select the connected
protocol and click OK.
www.netcomm.com.au
Page 24 NP3640 Fast Ethernet Mini Print Server User Guide
Rev. 1 - YML657