Floor Brush - POLTI SMART 45 Instruction Manual

If necessary (areas which are hard to access)
extension hoses can be added to the gun.

FLOOR BRUSH (7)

Connect the large brush connection (6) to
the large brush (7) as shown in the figure
5.
• To clean floors, attach a dry, clean cloth to
the brush and pass it moving from top to
bottom without pressing. When one side
is dirty, turn the cloth.
• Use the brush without cloth over dirty or
scaled areas and over tile joints making
lateral movements to lift the dirt.
• For vertical washable surfaces or uphol-
stery and ceilings, cover the brush with a
dry cloth and proceed as for the floor.
• On all types of synthetic or wool
floor/wall carpets, as well as area rugs,
Vaporetto ensures maximum hygiene, gi-
ving them back their original appearance
and brightening up the colours. Run the
brush without cloth over the surface to
make dirt rise to the surface, cover the
brush with a cotton cloth locking it in the
relevant lever hooks (9), then wipe the
surface again to collect the dirt. Proceed
rapidly and without pressing over the car-
pet, running the brush forward, backward
and sideways without pausing too long at
the same point. Treatment can be repea-
ted as often as you like, with no danger
for the surfaces. The drying is almost im-
mediate. If the carpet is very dirty or satu-
rated with cleaning products, do not to
insist too much. Results will be evident
only after a few uses of Vaporetto.
• To clean stubborn stains, before cleaning
as indicated above, direct the steam di-
rectly onto the stain with the greatest
possible angle (never vertically to the sur-
face to be treated) and position a cloth
beyond the stain, in order to collect up
the dirt that has been "blown" away by
the steam pressure.
SMALL BRUSH WITH WINDOW CLEA-
NING FITTING (9)
Windows are washed in 2 stages:
•steaming the surface to dissolve dirt,
using the steam control lever (3);
• wiping with the squeegee attachment (9)
working from the top downwards, making
sure the rubber wiper fits closely to the
glass to remove dirt without releasing
steam.
The squeegee attachment (9) may also be
used as a small steam brush for cleaning all
areas where use of a large brush would be
inconvenient. Just cover the squeegee at-
tachment with a terry cloth cover (11) and
use it to clean fabrics in the home (after te-
sting on a hidden corner), upholstery, en-
crusted dirt...
120° TOOL (14)
The 120° tool, which may be connected di-
rectly with the steam gun, has an inclined
nozzle for directing the jet of steam onto
hidden, hard-to-reach spots for cleaning
radiators, window and door frames, bath-
room fixtures and shutters. To remove dirt
encrusted on small surfaces such as cooker
elements, roller blinds and bathroom fixtu-
res or between tiles, apply the round brush
(15) to the 120° tool, which combines the
mechanical action of bristles with steam to
get rid of even the stubbornest dirt.
N.B.: do not use the brush (15) on particu-
larly delicate surfaces as it could harm
them.
KALSTOP optional
Kalstop is thelimescale product for applian-
ces with boiler for ironing and steam cleaning.
Regular use of Kalstop, every time the tank is
filled with water:
- Extends the life of the appliance.
- Allows emission of a "drier" steam
- Prevents limescale build up.
- Protects the walls of the boiler.
- Contributes to saving energy.
HOW TO USE KALSTOP
- Dilute one phial in 5 litres of water before
putting it in the tank.
- Fill the tank as described in Chapter Prepa-
ring for use.
- Proceed with the normal cleaning opera-
tions.
| 24 |