Installation; Siting The Keypad - Scantronic I-KP01 Installation Manual

Siting the Keypad

Do site the keypad:
Within the area protected by the alarm system.
At a convenient height and location for the user.
Out of sight of potential intruders.
Do NOT site the keypad:
Next to electronic equipment, particularly computers,
photocopiers or other radio equipment, CAT 5 data lines or
industrial mains equipment.
Where the cable run from the end station will be longer than
100m (see page 5 ).
Note: Do not site two or more keypads closer than one metre
together, otherwise their prox readers will interfere and be
unable to read tags.
Fitting
Use M5 25mm countersunk screws in at least three fixing holes
when mounting the back of the keypad on the wall.
Figure 5. Screw Keypad Back Box to Wall
Page 4

Installation

I-KP01