Paper Handling; Load Paper; Load Paper In The Paper Tray - Brother MFC-L6750DW User Manual

2

Paper Handling

Load Paper

Load Paper in the Paper
Tray
• If the Check Size setting is set to On and
you pull the paper tray out of the
machine, a message appears on the
LCD asking if you want to change the
paper size. Change the paper size and
paper type settings if needed, following
the on-screen instructions.
• When you load a different size and type
of paper in the tray, you must change the
Paper Size and Paper Type settings in
the machine or on your computer, also.
• When you use thick paper, open the
back cover (face up output tray) to let the
printed paper exit onto the face up
output tray.
1
Pull the paper tray completely out of the
machine.
2
Press and slide the paper guides to fit
the paper.
Press the green release levers to slide
the paper guides.
For Legal or Folio size paper, press the
release button (1) in the bottom of the
paper tray or the release lever (2) in the
back of the tray, and then pull out the
back of the paper tray. (Legal and Folio
size paper are not available in some
regions.)
For trays with a release button:
1
For trays with a release lever:
3
Fan the stack of paper well.
2
8