Care And Maintenance; Technical Description Of The Models,13 - Indesit VRA 631 T B Operating Instructions Manual

Care and maintenance

Switching the appliance off
Disconnect your appliance from the electricity supply
before carrying out any work on it.
Cleaning the appliance
! Do not use abrasive or corrosive detergents (for
example, products in spray cans for cleaning barbecues
and ovens), stain removers, anti-rust products, powder
detergents or sponges with abrasive surfaces: these may
scratch the surface beyond repair.
! Never use steam cleaners or pressure cleaners on the
appliance.
• It is usually sufficient simply to wash the hob using a
damp sponge and dry it with absorbent kitchen towel.
• If the hob is particularly dirty, rub it with a special glass
ceramic cleaning product, then rinse well and dry
thoroughly.
• To remove more stubborn dirt, use a suitable scraper.
Remove spills as soon as possible, without waiting for
the appliance to cool, to avoid residues forming crusty
deposits. You can achieve excellent results by using a
rust-proof steel wire sponge - specifically designed for
glass ceramic surfaces - soaked in soapy water.
• If any plastic or sugary substances are accidentally
melted on the hob, remove them immediately with the
scraper, while the surface is still hot.
• Once it is clean, the hob may be treated with a special
protective maintenance product: the invisible film left
Technical description of the models
This table provides a model-by-model list of the energy absorption values, type of heating elements and diameters of
each cooking zone.
Key:
H = single hilight
HD = double hilight
HT = triple hilight
AD = double halogen
Hobs
Cooking zone
Back Left
Back Right
Front Left
Front Right
Total power
Hobs
Cooking zone
AD 2200/800
Back Left
Back Right
Centre Left
Front Left
Front Right
Total power
VRA 640 C
VRA 640 X
Power (W) Diameter (mm)
H 2300 210
H 1400 160
H 1200 145
H 1800 180
6700
VEA 645 D C
Power (W) Diameter (mm)
210/140
H 1400 160
H 1200 145
H 1800 180
6600
by this product protects the surface from drips during
cooking. This maintenance task should be carried out
while the appliance is warm (not hot) or cold.
• Always remember to rinse the appliance well with clean
water and dry it thoroughly: residues can become
encrusted during subsequent cooking processes.
Stainless steel frame (only in models with outer frame)
Stainless steel can be marked by hard water which has
been left on the surface for a long time, or by cleaning
products containing phosphorus.
After cleaning, it is advisable to rinse the surface well
and dry it thoroughly. If water is spilt on the surface, dry it
quickly and thoroughly.
! Some hobs have an aluminium frame which is
similar to stainless steel. Do not use any cleaning or
degreasing products which are not suitable for use
with aluminium.
Disassembling the hob
If it is necessary to disassemble the hob:
1. Loosen the screws fixing the alignment springs on
each side.
2. Loosen the screws holding the fixing hooks in each
corner.
3. Take the hob out of its installation cavity.
! Do not attempt to repair the appliance yourself. If the
appliance breaks down, contact a Service Centre.
VRA 641 D B
VRA 641 D C
VRA 641 D X
Power (W)
1000
DH 2200/
H 1400
H 1200
H 1800
6600
VRA 631 T B
VRA 631 T X
Power (W)
H 1400
HT 2700/1950/1050
H 1800
5900
Diameter (mm)
210/140
160
145
180
Diameter (mm)
160
270/210/145
180
13
GB