Removing Viewfinder Cover And Lens - Polaroid Miniportrait 485B Repair Manual

Object Frame
Figure 3-5. Removing Viewfinder Cover and Lenses
8. If the Hot Shoe or its electrical connections need servicing, disassemble the Hot
Shoe as follows: (Figure 3-6)
• Insert the tip of a very thin blade under the Plate Spring at the point shown by
the arrow, and lift slightly to release the front lip of the Plate Spring. Now slide
the Plate Spring out to the rear of the Hot Shoe.
• Remove the three screws C securing the Hot Shoe clip and base to the
Viewfinder Cover. (Screws are attached to the Nut Plate below the Cover.)
• Replacement of the wiring to the Hot Shoe can now be done, or the soldered
connections checked and repaired, if necessary.
Tab
Slot
Slot
Tape
A
B
Eyepiece Lens
Bright Frame
Object Lens 2
Object Lens 1
17
Eyecup
Viewfinder Cover
Nut Plate