Operations For Modifying The Setting Contents - Hitachi PH Instruction Manual

The Apply key appears
on the following
screens.
Character input,
Calendar
condition,
substitution rulesetup,
Count condition,
Print format, Printing
specifications, User
environment setup,
Operation manage-
ment, Communication
environment setup.

2.1.3 Operations for Modifying the Setting Contents

● You can modify the setting contents (print description, character height, excitation
voltage, etc.) in any of the states "Ready," "Standby" and "Stop."
Classification
Data editing
Maintenance work
Auxiliary function Copy data (Printer → Memory card)
Maintenance work Touch screen setup
Auxiliary function
● As the Apply key appears if you modify the setting contents, be sure to press the
Apply key after you have completed modification.
(1) Operation in the "Ready" state
Procedure: Display the cursor and keyboard
1
Reflect the value in printing
3
A state with no cursor or
keyboard displayed
You can display or
remove the cursor or
keyboard by pressing
the Show cursor key
←Cursor
Keyboard
● Until you enter the Apply key, the setting contents on the display will not be
reflected. When you have modified the contents, check that the Apply key is not on
display and then restart printing.
● In case you enter a print terget signal the instant the Apply key is pressed, fault
"Print Data Changeover in Progress M" occurs.
State in which setting contents are modifiable
Screen name
Print line setup, Edit message, Calendar condition,
substitution rule setup, Count condition,
Print format, Printing specifications,
Select message, Save message
User environment setup, Operation management,
Date/time setup, Communication environment
setup,Excitation V update, Password setup/update,
Password protection
Manage messages, Create user pattern,
Copy data (Memory card → Printer)
Show
Manual Shut
Cursor
down
.
123 .
123
《 》
Sign
Sign
ABC .
← →
User
pat-
Insert Delete
tern
Spe-
Back
cial
The Apply key is
displayed by changing
1
the setting.
Show
Shut
Cursor Manual
down
2
.
123
《 》
Sign
ABC .
← →
3
User
pat-
Insert Delete
tern
Spe-
Back
cial
Changing is reflected on printing by pressing
the Apply key.
At this point, the Apply key disappears.
State in which
setting contents
are modifiable
Enter a value
2
Data Entry Confirmation
The data entered will be used in the print message.
Solution Press [OK] to accept the data.
Cancel
OK
changes
When you press the
Back key to move
on, a confirmation
screen appears.
The changed
←Cursor
value is not
yet reflected
on printing.
Keyboard
Ready,
Standby,
Stop
Standby,
Stop
Cancel
Manual Shut
Apply
down
.
123
》
《
Sign
ABC .
← →
User
pat-
Insert Delete
tern
Spe-
Back
cial
●Startup 2-7