Wired Remote Controller - Mitsubishi FDTN208HEN-S Instruction Manual

FDTN-H
FDEN series
Model
RUN LAMP (GREEN)
Illuminates during operation.

(2) Wired remote controller

Models FDT, FDR, FDU, FDUM, FDFL series
FDR,FDU, FDUM and FDFL series are not provided with AUTO SWING switch.
Panel shown below will appear if you open the cover. All contents of display on the LCD are indicated
simultaneously for the purpose of explanation.
Pull the knob on the cover to this side to open it downward.
Filter sign
When this sign is indicated, clean the filter.
Remote display
This is displayed when the unit is controlled
with an individual controller during normal operation.
(Also displayed when the air conditioner is stopped.)
Central display
This is displayed when the unit is
controlled with the optional central console.
Timer operation display
Contents of timer operation are displayed.
(Also displayed when the air conditioner
is stopped.)
Setting
temperature display
Displays the temperature
that has been set.
Fan speed display
Displays the fan speed that has been set.
Filter reset switch
Use this switch to reset (erase) the filter
sign display.
(Press the switch after cleaning the air filter.)
Cover
Inspection switch
Use this switch when servicing the unit.
Timer switch
Use this switch when selecting contents of timer operation.
Set switch
Use this switch to set a time for the timer.
242
Heavy Duty
RUN CHECK ON/OFF
CHECK LAMP (YELLOW)
When a malfunction occurs, the lamp
flashing.
HOT
AUTODRYCOOLFANHEAT HEAT
CENTER REMOTE FILTER
KEEP
PROGRAM TIMER
SET TEMP FAN
Hi
ON OFF Outdoor No.
E
A M Mi
°C
P M
Lo
F A N
FILTER
TIMER MODE
RESET SPEED
T E M P
T I M E
A U T O
SET
CHECK
SWING
Remote controller
signal receiver
BACK UP SWITCH
When the remote controller is miss-
ing or defective, this switch can start
and stop the air conditioner.
Use the back up switch when the bat-
tery is exhausted, or when the re-
mote controller is missing or defec-
tive.
Usually operate the air conditioner
with remote controller.
Operation mode display
Displays the operation mode that has
been selected.
(Cooling only air-conditioner has the display
of "COOL" ,"DRY" and "FAN" only.)
Heating
preparation display
Operation/
Inspection indicator lamp
During operation: Green lamp flashes.
In case of error: Red lamp flashes.
On/Off switch
Use this switch to start or stop the
air conditioner.First push on the
switch starts the unit and second
push stops it. (The switch can be
operated without opening the cover.)
°C
Return air
temperature display
Displays the return air temperature.
Note
Indicated value may be different
from actual reading on a thermometer
or other instrument but this is not
necessarily an error.
Auto swing display
Indicates the swing louver condition.
Mode switch
Use this switch to select operation
modes.
Fan speed switch
Use this switch to set a fan speed.
Auto swing switch
Use this switch to operate or stop
the swing louver.
Temperature/
Time setting switch
Use this switch to set the room
temperature or time on the timer.