Table of Contents
Advertisement
http://202.224.189.178/~sgml/viewing/SA-HT822VP/ALL/SVC/s0401010000.html
4.1.1 Leakage Current Cold Check
TOP PREVIOUS NEXT
1. Unplug the AC cord and connect a jumper between the two prongs on the plug.
2. Measure the resistance value, with an ohmmeter, between the jumpered AC plug and each
exposed metallic cabinet part on the equipment such as screwheads, connectors, control shafts,
etc. When the exposed metallic part has a return path to the chassis,the reading should be
between 1MΩ and 5.2MΩ.
When the exposed metal does not have a return path to the chassis, the reading must be
.
TOP PREVIOUS NEXT
http://202.224.189.178/~sgml/viewing/SA-HT822VP/ALL/SVC/s0401010000.html9/3/2004 9:42:56 AM
Fig. 1
Advertisement
Table of Contents
