Installation - prologue IW004 36-5136 Instruction Manual

Sensor unit and probe
33. LED indicator
34. [RESET] Returns sensor to default factory settings
35. Battery cover
36. Channel selector
37. Sensor unit
38. Foot/wall bracket

Installation

Batteries
Note: Use fresh, high quality alkaline batteries. Never mix old and new batteries.
Change all batteries at the same time. Never combine rechargeable batteries with
standard batteries.
Main unit
1. Slide main unit's battery cover in the direction of the arrow.
2. Observe the markings on the bottom of the battery compartment and insert
3 × AAA/LR03 batteries.
3. Refit the battery cover.
Sensor unit
1. Remove the foot/wall bracket from the sensor unit
and flip it towards the back.
2. Slide the sensor's battery cover in the direction of
the arrow.
3. Observe the markings on the bottom of the battery
compartment and insert 2 × AAA/LR03 batteries.
4. Refit the battery cover.
33 34 35
6
36
37
38