Scosche BlueFusion BFCL2K Instruction

Scosche BlueFusion BFCL2K Instruction

Hands-free bluetooth interface for select 2003-up select class 2 gm vehicles

Advertisement

HANDS-FREE BLUETOOTH
SELECT 2003-UP SELECT CLASS 2 GM VEHICLES
The Scosche BFCL2K BlueFusion
ly communicate with your Bluetooth enabled celular phone and Stereo Bluetooth
transmitters. The BFCL2K communicates directly with your factory radio allowing
you direct control of hands-free, voice dialing, and A2DP functionality. These in-
terfaces maintain the original integrity of important diagnostic and safety systems
within the vehicle. For up-to-date applications or any Technical asistance with this
product, call Scosche Tech support at (800) 621-3695 Ext 3.
APPLICATIONS
CADILLAC
ESCALADE
ESCALADE ESV
ESCALADE EXT
CHEVROLET
AVALANCHE
COLORADO
CORVETTE
IMPALA/IMPALA SS
MONTE CARLO
SILVERADO CLASSIC 2007
SILVERADO NEW
SUBURBAN
TAHOE
TRAILBLAZER
UPLANDER
VENTURE
GMC
CANYON
ENVOY/XUV
SIERRA CLASSIC
SIERRA NEW
YUKON
YUKON XL
HUMMER
H2
H3
PONTIAC
MONTANA SV6
iPhone is a trademark of Apple Inc., registered in the US and other countries.
©2010 SCOSCHE INDUSTRIES, INC.
Bluetooth Interface will allow you to wireless-
TM
HARNESS APPLICATIONS
WITH XM SAT
TUNER
2003-06
BFCL2XMB
2003-06
BFCL2XMB
2003-06
BFCL2XMB
2003-06
BFCL2XMB
2004-10
BFCL2XMB
2006-08
BFCL2XMB
2003-05
BFCL2XMB
2003-05
BFCL2XMB
2003-06
BFCL2XMB
2003-06
BFCL2XMB
2003-06
BFCL2XMB
2004-08
BFCL2XMB
2005-07
BFCL2XMB
2003-05
BFCL2XMB
2004-10
BFCL2XMB
2004-06
BFCL2XMB
2007
BFCL2XMB
2003-06
BFCL2XMB
2003-06
BFCL2XMB
2003-06
BFCL2XMB
2003-07
BFCL2XMB
2006-07
BFCL2XMB
2005-06
BFCL2XMB
BFCL2K
INTERFACE FOR
®
WITHOUT
XM SAT
BFCL2HB
BFCL2HB
BFCL2HB
BFCL2HB
BFCL2HB
BFCL2HB
BFCL2HB
BFCL2HB
BFCL2HB
BFCL2HB
BFCL2HB
BFCL2HB
BFCL2HB
BFCL2HB
BFCL2HB
BFCL2HB
BFCL2HB
BFCL2HB
BFCL2HB
BFCL2HB
BFCL2HB
BFCL2HB
BFCL2HB
SI 02/10-BFCLK2 (3000533)
BFEXTB
(EXTENSION)
NOT REQUIRED
NOT REQUIRED
NOT REQUIRED
NOT REQUIRED
NOT REQUIRED
YES /XM ONLY
YES /XM ONLY
YES /XM ONLY
NOT REQUIRED
NOT REQUIRED
NOT REQUIRED
NOT REQUIRED
NOT REQUIRED
NOT REQUIRED
NOT REQUIRED
NOT REQUIRED
NOT REQUIRED
NOT REQUIRED
NOT REQUIRED
NOT REQUIRED
NOT REQUIRED
NOT REQUIRED
NOT REQUIRED

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BlueFusion BFCL2K and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Scosche BlueFusion BFCL2K

  • Page 1 A2DP functionality. These in- terfaces maintain the original integrity of important diagnostic and safety systems within the vehicle. For up-to-date applications or any Technical asistance with this product, call Scosche Tech support at (800) 621-3695 Ext 3. APPLICATIONS HARNESS APPLICATIONS...
  • Page 2 SEEK TO END/ PREVIOUS MENU exhibited operating difficulties with the BlueFusion system. If you own these models or other models from these manufacturers call Scosche Tech Support for the latest updated phone incompatibility list. (800) 621-3695. • This BlueFusion device will pair to ONE phone at time. • Due to variances in cell phone manufacturing, Caller ID functions may vary...
  • Page 3 VEHICLES WITH SAT TUNER IMPORTANT NOTE: If vehicle is equipped with XM tuner box (active or not active) the BFGMLANXMB harness must be used. The BFGMLANXMB “T” harness must be installed at the SAT radio Tuner box location. XM TUNER LOCATIONS: Trucks/SUVs: Behind Glove box, Crossovers: Left rear side panel, Sedans: Trunk.
  • Page 4 2. Carefully route the microphone cable behind the headliner and down the “A” (front most) pillar Use caution when routing cable and avoid sharp edges or moving metal parts. 3. Route the cable to the BlueFusion interface location and plug it into the 3-pin connector on the Scosche “T “harness.
  • Page 5: Pairing Instructions

    PAIRING YOUR CELLULAR PHONE IMPORTANT NOTE: Your Bluetooth cellular phone must be paired with the BlueFusion system before use. Once the initial pairing process has been copleted, your phone should easily connect and disconnect to BlueFusion during daily use. PAIRING INSTRUCTIONS: 1.
  • Page 6 USING THE RADIO CONTROLS These are the only buttons used for the Multi-Function Knob TUNE interface. TO SCROLL MENUS DISPL Please read and understand this entire Seek Forward TO ANSWER/ SELECT SEEK manual before operating the interface. Seek Back SEEK TO END/ PREVIOUS MENU USING THE STEERING WHEEL CONTROLS All other buttons on the steering wheel controls are defaulted to send the...
  • Page 7: Switching Between Sources

    SWITCHING BETWEEN SOURCES Your BlueFusion system functions as an XM source through your Factory Stereo. In order to access BlueFusion, the XM band must be selected (See diagram). If listening to a source other than XM, BlueFusion will automatically switch to the XM band when there is an incoming call.
  • Page 8 HANDS-FREE OPERATION HANDS-FREE OPERATION INCOMING CALLS: When receiving an incoming call the Factory radio will automatically switch to the BlueFusion source and display caller number. The BlueFusion system is designed to display caller ID only. (Some phones may provide additional message string information and provide a name in place of the calling number.
  • Page 9 SECONDARY AND CONFERENCE CALL HANDLING When receiving a second call while in an active call the BlueFusion display a new menu with a list of second call handling functions. TO ANSWER THE SECOND CALL AND PLACE ACTIVE CALL ON HOLD: Press Seek forward on radio.
  • Page 10 A2DP pairing instructions. PAIRING A2DP FROM A SEPERATE DEVICE: To pair a separate device, such as the Scosche TZ4 or other Bluetooth Audio transmitting device, there must first be a phone paired to the BlueFusion’s Hands Free profile.
  • Page 11: Troubleshooting

    Bluetooth module of the BFGM. We FUNCTIONALITY FEATURES, MANY PHONES MAY WORK DIFFERENT WITH recommend contacting the Scosche Technical Support at 1-800-621-3695 Ex.3 THE BLUETOOTH MODULE OF THE BFGMK. WE RECOMMEND with any common or reoccurring issues.
  • Page 12: Limited Warranty

    Scosche Industries Inc. warrants this product to be free from defects in material and workmanship for a period of 1 year from purchase. This Scosche product is sold with the understanding that the purchaser has independently determined the suitability of this product.

Table of Contents