Display Operation - Gazelle Innergy User Manual

Removing and/or locking the display
22 
23
•
•
•
24
25
26
70
To prevent theft and/or damage, we advise
you to take the display with you after
completion of your bike ride.
Y ou can easily remove the display by pushing
button #3 (see overview image of the display). This
releases the display. (Photo 22)
Remove the display by taking it out of the display
holder under an angle. (Photo 23)
Y ou can simply store the display in the bike key
bag that comes with the bike. (Photo 24 + 25)
I f you prefer to leave the display attached to the
bike, we advise you to flip the small pawl at the
holder's right bottom side, using a flat screwdriver
(Photo 26). In doing so you activate the display
lock. However, we advise you to take the display
with you when you park the bike.

Display operation

• The display features 4 buttons:
1 On/off button for the pedal assistance (Photo 27)
If you press this button, you activate the pedal
assistance. It is standard for the assistance to start in the
"eco" mode. By pressing this button another time, you
switch off the assistance again.
2 On/off button for the bike lights (Photo 28)
If you press this button, you manually switch on the
bike's lights and the display lighting. By pressing this
button again, you switch them off.
3 Mode button for displaying the characteristics of
your ride (Photo 29)
This button covers the following functions:
"Total km" = total number of kilometres covered on
this bike since the beginning.
"Average" = your average speed during the current
trip (or during your last trip if you consult
this function while standing still).
"Trip" = total number of kilometres covered
during this bike trip.
i
You can reset "trip" to 0 by keeping the Mode
button pressed in for 3 seconds.
27
28
29
71