Vented Into Masonry Chimney - Whitfield quest Owner's Manual And Operating Instructions

Typical Installations – Freestanding Stove (cont.)

VENTED INTO MASONRY CHIMNEY

A freestanding Quest may be vented into an existing flue. If a liner is run all the way to the top
of the existing chimney, the top should be sealed with a metal plate (aluminum, or galvanized
or
stainless steel). Start the vertical run with a "tee" at the back of the stove. Other options are
6" Minimum
from front of
stove to edge of
non-com-
bustible floor
protection
IMPORTANT:
We recommend at least
2" to 3" min. between
the stove and wall,
to allow room for
servicing, power cord
and the hopper lid.
1" Minimum
clearance from
back of stove to
combustible material
6" Min.
(Figure 30)
Freestanding Vented Into Masonry Chimney
27
Optional
Complete
Liner
Option:
Clean-out door
to access "tee"
All vertical pipe
runs should
begin with a
3" or 4"
clean-out "tee"