Location Of Controls - Buffalo CD969 Instruction Manual

Location of Controls

Controls
1. Vacuum & Seal Button / Cancel

Press to start automatic operation of vacuuming the bag and then automatically seals the bag when vacuum is
completed

Press to stop the Vacuum cycle and release lid.
2. Manual Seal

Use to seal open end of a bag when making bags from roll.

During automatic 'Vacuum and Seal' function press to immediately start the bag sealing process (to avoid crushing
delicate items)
3. Vacuum Time Screen

Shows the working time and progress of vacuuming
Vacuum Time Adjusting Button (Vac Time "+" or "-")
4.

Simply adjust the vacuum time "up" or "down" by using "+" or "-" buttons.
5. Seal Time Screen

Shows the working time and progress of sealing function
Seal Time Adjusting Button (Seal Time "+" or "-")
6.

Simply adjust the seal time "up" or "down" by using "+" or "-" buttons.
7. Vacuum Gauge

Shows the vacuum level inside the vacuum chamber.
Telephone Helpline: 0845 146 2887 (United kingdom)
-3-