Technical Specifications - Intelbras TIP 200 LITE Installation Manual

Technical specifications

WAN Interface (internet)
LAN Interface (PC)
Network Protocol
Codecs
Power supply
Power consumption
Dimensions
Weight
Operating temperatures
Operating humidity range
Storage humidity range
Only the TIP 200 and TIP 200 S support PoE technology and follow IEEE802.3af norms.
1
The G722 codec (wideband) is responsible for the HD voice. However, in order to achieve HD
2
Attention: this device uses VoIP (Voice over IP) technology, and the quality of
its functioning depends on the amount of traffic and the prioritization of the
network to which the product is connected. In the event of abnormalities in
the calls made, such as audio problems, check your network status
VoIP service provider.
Consult your VoIP provider about which codec (voice coder/decoder) to use
and about the settings necessary for the TIP 200 LITE / TIP 200 / TIP 200 S IP
telephone in order to achieve the best voice quality.
The TIP 200 S model is designed for specific use in some PBX models. For further
information, refer to Intelbras through telephone number +55 48 2106 0006.
Should there be any doubt, please access www.intelbras.com.
36
10/100BASE-T 1 x RJ45 with PoE
10/100BASE-T 1 x RJ45
SIP v1 (RFC 2543), v2 (RFC 3261)
G722 (wideband)
G729AB, GSM and iLBC
Input:
Output:
1.4-2.6 W
195 x 150 x 152 mm
770 g
0 ºC to 60 ºC
10% to 95%
5% to 90%
voice, the PABX must also support this codec.
, G711 μ/A, G723, G726,
2
100-240 VAC, 50-60 Hz
5 VDC , 1,2 A
1
with your